DINAN BMW G87 M2 Exhaust Solutions
DINAN BMW G87 M2 Mid-Pipe
DINAN is pleased to be able to announce a new product offering being added into the catalog; the DINAN Middle Exhaust / X-pipe for the BMW G87 M2. Combine this with the DINAN BMW G87 M2 rear exhaust, and experience the DINAN difference today and never look back!
Part Number(s): D660-0101
Application(s):
- 2023-2025 G87 M2
 
The Quick and Dirty (Features and Benefits):
- Smoother, louder and sportier sound
 - 76mm (3-inch) tubing replaces stock 70mm (2.75-inch) tubing for free flow
 - Deletes resonators between the secondary catalysts and rear muffler for increased volume
 - Includes X-pipe crossover made from mandrel bent tubing for minimum restriction
 - 5-pounds lighter than the stock mid-section (Stock: 22-pounds vs. Dinan: 17-pounds)
 - 100% 304 stainless steel construction
 - Factory-like fitment with included mounting hardware
 - Perfect complimentary piece to the DINAN Axle Back Exhaust for maximum aural satisfaction (see more on this below)
 
The Story:
Looking to elevate the external acoustics of your G8x but want to upgrade in stages and/or not break the bank?
The DINAN Middle Exhaust for the G87 M2 introduces a more aggressive tone and an increase in volume over the stock system while retaining the factory muffler at a budget friendly price point. Should the desire for more arise, however, it can easily be paired with the matching DINAN axle back exhaust for further aural enhancement and a more aggressive growl (see below). It is a union that boasts a bold, yet sophisticated, exhaust note that neither can fully achieve on their own.
This middle exhaust itself removes the hydro-formed factory center section from the secondary catalysts back to the axle back, including both resonators, and replaces it with larger 3-inch T304 stainless steel tubing for freer flowing capabilities. In place of the forward factory resonator, Dinan incorporates a beautifully crafted X-pipe made from mandrel-bent tubing for minimum restriction, unlike stamped X-pipes which are commonplace in the market. This hand-made ‘X’ is not only the focal point of the system in terms of aesthetics but also the star when it comes to the effects on the sound. Promoting even flow to both banks of tips, the ‘X’ removes unwanted nuances in sound caused by uneven exhaust flow that is present in the stock system. Along with the inherent benefit of increased volume by removal of the resonators, the Dinan X-Pipe for the G87 M2 produces a louder, smoother, and fuller exhaust note that will deliver smiles time and time again.
DINAN BMW G87 M2 Exhaust
Features:
- Maximum gains of +6 HP and +5 lb-ft of torque
 - Enjoyably louder, sportier sound
 - Drone abatement technologies used to reduce cabin resonance
 - Four, diffuser filling, 4.5-inch (114mm) double-walled, black ceramic coated clamp-on tips with laser engraved Dinan logo
 - Larger diameter piping for increased flow (76mm vs. 70mm)
 - 6-pounds lighter than the stock axle back (Stock: 44-pounds vs. DINAN: 38-pounds)
 - Stock exhaust valve actuators reused, and operation of exhaust valve is unchanged so exhaust tone can be adjusted via the M-drive settings
 - Computer controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions
 - 100% 304 Stainless Steel construction
 - Factory-like fitment with included mounting hardware
 
BRracing – matching performance and excitement
BRracing is a DINAN dealer and installer, call us today to order your BMW G87 M2 enhancements







	
	

