There are many solutions for lowering your car….which is good, as that provides customers with choice. Some are just sport springs, but you know nothing about them. Some are too aggressive, some lower the car too much. DINAN spends a lot of time engineering and designing the kit to match customers needs. If you are looking for a kit that lowers your car, but not too much, and yet is firmer so that the lowered car doesn’t bottom out…then the DINAN kit is for you.
Available for almost all model BMWs, going all the way back to the E36 3 series, to most of todays’ models. Check with us to determine if there is a proper application for your car.
DINAN SUSPENSION SPORT SPRINGS
Suspension systems that not only transform the stance of the vehicle but also maintain ride quality and improve upon handling are what Dinan® suspensions are known for. This is accomplished by pairing springs sets with bump stops, spring perches or both to maintain suspension travel resulting in a smooth ride while also improving mechanical grip and handling. This is what makes Dinan suspension systems unique. While they are able to sell each component separately it is highly recommend that both the spring sets and the supplemental ride quality and handling kits are used in tandem in order to maintain the Dinan quality standards their customers are used to. Experience the Dinan difference with this combination and enjoy the ride it provides.
Dinan’s Performance Spring set provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, as an example, Dinan® lowers the 435i by a 1″ in the front and rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot peened for stress relief to last the life of the car. The 50% increase in stiffness will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip, for high speed driving situations that will inspire confidence in your car’s capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle.
Benefits of the Dinan® Performance Spring Set :
+ 50% increase in spring stiffness
+ Lowers the vehicle 1″ in the front and rear (for most models, check the specifics for your model of car)
NOTICE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height, performance, and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects, any claims against the car’s improper handling/ride quality traits due to not purchasing the corresponding handling kit will not be warranted.
BRracing – delivering the variety of solutions to match cusotmers needs
Leave A Comment
You must be logged in to post a comment.