BRracing's BMW E82 Harness Bar, Down Bars, X-Brace, and Shock Tower Brace.
Complete "bolt-in" solution for BMW E82 1xx series (and this now includes the 1M)
Key Features -
- complete bolt-in implementation, no holes or drilling or welding required
- tight tolerances
- includes hardware kit for installation
- includes powder coating to your color of choice
We even added a little set of extras, like integrated attachment points for the lower harness connections on each side.
The main bar has a massive plate on the bottom, and uses both the side seat belt mount hole in the side rail, and the hole in the bottom floor pan that is over 4" away from the side rail, and in this manner, provide the strength required. The rear strut brace uses two existing rear bulkhead mounts, that have already been strongly reinforced by BMW in the car. Again, no new holes, but incredibly strong attachment points. Plus, the rear strut bar sits so low, and forward in the trunk, that the complete trunk area is still usable, and you can even stow your skis and other things w the seats down. We even made sure visibility from the front seat is unobstructed thru the rear x-brace.
You can get the bar(s) in almost any powder coat color you want, and not have to pay a fortune to get the whole thing.
And, for those that want to know, the whole solution is made of the following -
1.5" x .095 4140 Chrom-moly tubing
Chrom-moly clevis mounts
Grade 8 and above metric hardware
Full TIG welding on all attachment points (tolerances are tight, welds are beautiful)
This has been installed and tested by many customers world-wide.